Report · houses built in
What a house built in 2010 often has
- Age
- 16yrs
- On record
- 13
- Check first
- 2
- Built without
- 2
Choose one to hide issues that only apply elsewhere.
Headline findingCheck first
Gree-made dehumidifiers (2013 recall)
2005–2013Court record: Dates come from a court settlement or a product recall.
About 2.5 million dehumidifiers sold from 2005 to 2013 under 13 brand names, including Frigidaire, Kenmore and GE, can overheat and catch fire.
13 things on record apply to a 2010 house: 2 to check first, 2 protections it was built without, and 9 more by part of the house.
Where 2010 sits among every issue on record
Point at a band to read it · drag or use the arrow keys to compare yearsWhat the 2010 line crosses13 bands
- Electrical
- Plumbing
- Nothing for 2010
- Hazardous materials
- Nothing for 2010
- Roof, walls & windows
- Heating & cooling
- Solid: most likely years
- Faded edge: approximate date
- Sharp edge: legal or recall date
- Hatched: protection missing
- Check first
Check these first
The 2 items most worth a look in a 2010 house: safety first, then cost.
Gree-made dehumidifiers (2013 recall)
About 2.5 million dehumidifiers sold from 2005 to 2013 under 13 brand names, including Frigidaire, Kenmore and GE, can overheat and catch fire.
How to checkBasement & foundation
- Look in the basement, crawlspace entry and laundry area for a portable dehumidifier.
- Read the brand and pint capacity on the front.
- Find the sticker with the model number and date code on the back, front or side of the unit.
- Compare the model and date code with the tables on the CPSC recall notice. Many Gree and SoleusAir models are listed as all units.
If you find itIf it matches, unplug it and stop using it. The remedy was a refund from Gree, not a repair; check the recall notice for whether refunds are still offered.
How commonAbout 2.2 million units were recalled in the US in 2013, rising to about 2.5 million with the GE-brand expansion; no count of affected homes exists.
Keep in mindA dehumidifier is a portable appliance, so it may have come with the house or been bought later for a house of any age. A separate 2023 Gree recall covers other models made 2011 to 2014.
Year predicts poorlyThis is often added to older houses later, so check whatever the build year.
Details and 9 sources →2005–2013
Court record: Dates come from a court settlement or a product recall.No reliable count existsKidde NightHawk hard-wired smoke/CO alarms (2016 recall)
A popular hard-wired smoke and CO alarm from 2004 to 2010 can go quiet at the end of its life, so it seems fine when it is not.
How to checkWhole house
- Look for white round alarms 5 to 6 inches across with 'Kidde' engraved on the front.
- Twist one off its ceiling base (it stays wired to a plug) and read the label on the back.
- Look for model KN-COSM-IB with a manufacture date between June 1, 2004 and December 31, 2010.
- A compartment on the back for a 9-volt backup battery is another sign of this model.
If you find itIf it matches, contact Kidde about a replacement and check the recall notice for whether the offer is still open. Any alarm made in these years is well past its stated life, so replace it either way.
How commonAbout 3.6 million units were recalled in the US; no count of affected homes exists.
Keep in mindNo one knows how many went into new houses versus replacement installs. Alarms get swapped over the years, so read the label rather than going by build year.
Details and 6 sources →2004–2010
Court record: Dates come from a court settlement or a product recall.No reliable count exists
Built without
Protections that became standard after 2010. A house keeps what it was built with unless someone added them, and many have been.
Outlets without child-safety shutters
Since the 2008 electrical code, new houses get outlets with built-in shutters that stop a child pushing a key or hairpin into the slot.Since the 2008 electrical code, new houses get outlets with built-in shutters that stop a child pushing a key or hairpin into the slot.
Read the full entry →Built 2010 or earliermost likely up to 2007
Federal rule: Dates come from a federal rule or a model building code.No reliable count existsHow to check
- Look closely at an outlet: 'TR' embossed on the face between the slots means tamper-resistant.
- You can see plastic shutters inside the slots.
If you find itIf small children live in or visit the house, have outlets replaced with TR-listed ones.
How commonNo reliable count exists. Houses built before their state adopted the 2008 code will generally lack them unless outlets were replaced.
Keep in mind2008 is the model code year; states adopted it at different times. As of 2016, the rule did not apply to manufactured homes.
Details and 3 sources →Built before mandatory airtightness testing (2012 energy code)
The 2012 energy code was the first to make new houses pass a whole-house air leakage test.The 2012 energy code was the first to make new houses pass a whole-house air leakage test.
Read the full entry →Built 2015 or earlier
Federal rule: Dates come from a federal rule or a model building code.LikelyHow to check
- Look near the electrical panel or furnace for an energy code certificate or a posted blower-door test result.
- Ask the seller or builder whether a blower-door test or energy rating was done.
- Notice drafts around outlets, attic hatches, recessed lights and window trim on a cold or windy day.
If you find itNothing is required. If the house feels drafty or bills are high, an energy audit with a blower-door test shows where air sealing would help most.
How commonHouses built before their state adopted the 2012 code were not required to pass this test. Adoption dates by state were not researched.
Keep in mindThis is a model code. States and cities adopted it at different times, so the end year here is stretched a few years and is soft. Check your state's adoption date.
Details and 3 sources →
Everything else, by part of the house
Materials and products often installed in 2010. Open any row for how to check.
Where to look. Each number counts the items in this report for that part of the house.
Electrical1
Siemens and Murray circuit breakers (2010 recall)
Siemens and Murray breakers sold in the summer of 2010 have a clip that can break and let the panel overheat.Siemens and Murray breakers sold in the summer of 2010 have a clip that can break and let the panel overheat.
Read the full entry →Built in 2010
Court record: Dates come from a court settlement or a product recall.No reliable count existsHow to check
- Open the panel door (not the cover behind it) and read the brand on the label and the breakers: Siemens or Murray.
- If it is one of those and the house was built or re-paneled around 2010, note it.
- Leave the date-code check to an electrician: the codes are on the side of the breaker, behind the panel cover.
If you find itDo not remove the panel cover yourself. Ask an electrician to compare the breakers with the CPSC list, and contact Siemens about inspection and replacement; check the recall notice for whether it is still offered.
How commonAbout 2.2 million units were recalled, counting breakers, load centers and meter combos together; no count of affected homes exists.
Keep in mindThe sale window was only three months, so most Siemens and Murray panels are not affected. Panels replaced in older houses in 2010 can have them too.
Year predicts poorlyThis is often added to older houses later, so check whatever the build year.
Details and 6 sources →
Plumbing & water1
Coaire and Quietside tankless water heaters (2014 recall, no remedy)
These tankless water heaters sold from 2008 to 2014 can overheat, and the maker is gone, so there is no fix on offer.These tankless water heaters sold from 2008 to 2014 can overheat, and the maker is gone, so there is no fix on offer.
Read the full entry →2008–2014
Court record: Dates come from a court settlement or a product recall.No reliable count existsHow to check
- Look for a white wall-mounted tankless heater about 25 to 28 inches tall.
- Check for 'S-Line Condensing' on the top front.
- Check for the brand 'Coaire' or 'Quietside' on the bottom front.
If you find itIf it matches, stop using it and have it replaced. CPSC says the firm is no longer in business, a remedy is no longer available, and the heater should be disposed of.
How commonAbout 29,000 units were recalled in the US; no count of affected homes exists.
Keep in mindTankless heaters are often installed as replacements, so one could be in a house of any age.
Year predicts poorlyThis is often added to older houses later, so check whatever the build year.
Details and 5 sources →
Kitchen & bath1
Kidde plastic-handle fire extinguishers (2017 recall)
Kidde recalled about 37.8 million fire extinguishers because some may not spray when you need them.Kidde recalled about 37.8 million fire extinguishers because some may not spray when you need them.
Read the full entry →1973–2017
Court record: Dates come from a court settlement or a product recall.No reliable count existsHow to check
- Look under the kitchen sink, in the pantry, garage and utility room for any Kidde extinguisher.
- Note whether it has a plastic handle (red, white or silver models) or a push-button Pindicator top.
- Read the model number on the label and compare it with the model list on the CPSC recall notice.
- On units made in 2007 or later, a 10-digit date code is printed on the side of the cylinder near the bottom.
If you find itIf the model is on the list, replace it and contact Kidde through the product safety recall page on kidde.com. Check the recall notice for whether the replacement offer is still open.
How commonAbout 37.8 million units were recalled in the US; no count of affected homes exists.
Keep in mindExtinguishers are bought, not built in, so the year a house was built predicts little: owners add them to houses of every age. The recall did not cover every Kidde extinguisher, only the listed models.
Year predicts poorlyThis is often added to older houses later, so check whatever the build year.
Details and 4 sources →
Heating, cooling & chimney1
R-410A air conditioners and heat pumps
Central AC installed from about 2010 to 2025 may well run on R-410A, a refrigerant that new equipment is now moving away from.Central AC installed from about 2010 to 2025 may well run on R-410A, a refrigerant that new equipment is now moving away from.
Read the full entry →2010–20252010 is in the peak years
Federal rule: Dates come from a federal rule or a model building code.LikelyHow to check
- Find the nameplate on the outdoor unit.
- Look for the refrigerant listed: R-410A, R-22, or a newer type such as R-454B or R-32.
If you find itNothing is required for a working system. When it is time to replace it, ask the contractor which refrigerant the new system uses and whether any other parts need changing.
How commonNo count of homes exists. EPA barred making new equipment with R-22 from January 1, 2010; that most systems since then use R-410A is an inference, not a sourced figure.
Keep in mindThe 2010 start is approximate. EPA's installation rules depend on when a system's parts were made, so check EPA's current page before relying on a cutoff. Many older houses got an R-410A system as a replacement.
Year predicts poorlyThis is often added to older houses later, so check whatever the build year.
Details and 4 sources →
Roof & attic2
Atlas Chalet and Stratford shingles
Atlas Chalet and Stratford shingles, sold from at least 1998 until 2010, drew federal lawsuits, and in 2017 a federal court in Georgia denied class certification.Atlas Chalet and Stratford shingles, sold from at least 1998 until 2010, drew federal lawsuits, and in 2017 a federal court in Georgia denied class certification.
Read the full entry →1998–2010
Court record: Dates come from a court settlement or a product recall.No reliable count existsHow to check
- Look at the roof from the ground: they resemble three-tab shingles with a darker printed shadow band across each tab.
- Look for small pock-like blisters and bald spots.
- Roofers in the Southeast tend to recognize them on sight.
If you find itHave a roofer look if you see blistering. No class settlement was found, so replacement is usually at the owner's cost unless an insurer accepts a storm claim, and because they are discontinued, matching repairs is difficult.
How commonNo reliable count exists, and no data on where they were most used was found.
Keep in mindThe first year of sale is uncertain; the court says only 'in the 1990s'. Many roofs from this period have been replaced, and most houses of the era have other shingles.
Details and 4 sources →Factory-built roof trusses
If your attic is a web of diagonal 2x4s joined by toothed metal plates, the roof is built from factory trusses, and cutting even one can badly weaken it.If your attic is a web of diagonal 2x4s joined by toothed metal plates, the roof is built from factory trusses, and cutting even one can badly weaken it.
Read the full entry →Built 1955 or later
Approximate era: Dates are an approximate era drawn from trade and reference sources.No reliable count existsHow to check
- In the attic, look for diagonal 2x4s forming W or M shapes, joined by toothed galvanized steel plates.
- Rafters, by contrast, are larger boards running from the ridge to the wall with open space between.
- Look for cut or notched members and plates that have backed out of the wood.
If you find itNothing is needed unless trusses are damaged or altered. Before any attic conversion, skylight or other change that touches a truss, get an engineer's design.
How commonNo reliable count exists for houses by year built.
Keep in mindTruss use grew over decades, and many houses still use rafters, especially custom homes and complex roofs. A reference source dates the connector plate to 1955.
Details and 1 source →
Foundation & basement3
Yellow CSST gas tubing without bonding
Flexible yellow stainless-steel gas tubing can be damaged by a nearby lightning strike, and older installs may lack the bonding wire that reduces the risk.Flexible yellow stainless-steel gas tubing can be damaged by a nearby lightning strike, and older installs may lack the bonding wire that reduces the risk.
Read the full entry →1990–2011
Approximate era: Dates are an approximate era drawn from trade and reference sources.No reliable count existsHow to check
- Look at exposed gas piping in the basement, attic, crawl space or at the furnace and water heater: flexible corrugated tubing in a yellow jacket is CSST (black-jacketed tubing is a newer type).
- Look for bonding: a clamp on a rigid gas fitting with a bare or green copper wire running to the electrical panel or grounding system.
If you find itIf you have yellow CSST and see no bonding wire, have a licensed electrician bond it following the tubing maker's instructions and current code. It is a small job.
How commonNo reliable count exists. It applies only to houses with gas service.
Keep in mindThe start year and the code year that made bonding mandatory were not confirmed, and states adopted codes at different times. CSST is still installed today, with bonding.
Details and 2 sources →Crumbling concrete foundations (pyrrhotite)
In parts of north-central Connecticut and central Massachusetts, some foundations poured with local quarry stone are crumbling because of a mineral called pyrrhotite.In parts of north-central Connecticut and central Massachusetts, some foundations poured with local quarry stone are crumbling because of a mineral called pyrrhotite.
Read the full entry →1983–2015
Approximate era: Dates are an approximate era drawn from trade and reference sources.No reliable count existsHow to check
- In the basement, look at the foundation walls for horizontal cracks and map-pattern (spider-web) cracking.
- Look for white powdery deposits, rust-brown staining and flaking.
- A clean-looking wall does not rule it out; a licensed engineer's visual inspection and a core sample tested for pyrrhotite confirm it.
If you find itIf you are in an affected area, have a licensed engineer inspect the foundation, especially before buying, and check with your state about any current testing or repair assistance.
How commonNo reliable count exists. The problem is tied to aggregate from certain local quarries, so it is limited to parts of central Connecticut and Massachusetts.
Keep in mindThe 1983 to 2015 window comes from state officials' figures that could not be independently confirmed, and only towns near the source quarries are affected. Most houses in Connecticut and Massachusetts are not at risk.
Details and 2 sources →Engineered I-joist floors
By 2005 about half of wood light-frame floors used engineered I-joists, which perform well day to day but can fail quickly in a fire if left exposed.By 2005 about half of wood light-frame floors used engineered I-joists, which perform well day to day but can fail quickly in a fire if left exposed.
Read the full entry →Built 1970 or later2010 is in the peak years
Approximate era: Dates are an approximate era drawn from trade and reference sources.PossibleHow to check
- Look up at the basement or garage ceiling for I-shaped joists: a thin OSB or plywood web with small lumber flanges top and bottom.
- They are usually printed with the maker's brand name.
- If you can see them, they are unprotected from below.
If you find itConsider covering exposed I-joists with drywall, and make sure working smoke alarms cover every level, including the basement.
How commonWikipedia: about 50% of wood light-frame floors used I-joists as of 2005.
Keep in mindNewer model codes are reported to require covering them, but that was not confirmed and code adoption varies by state. The hazard applies only where the joists are exposed.
Details and 2 sources →
What’s due at this age
A 2010 house is 16 years old. Here is where its parts stand against their typical life, and which ones have certainly been replaced by now.
- In their window
- 9
- Past life, if original
- 11
- Due within 5 yrs
- 6
- Replaced by now
- 8
8 of the 53 parts we track wear out so much faster than a 2010 house has stood that they have been replaced at least once. Know when something was last replaced? Enter the year (or a decade, like 2010s) and we’ll show where that part stands. It stays on this device only.
In the replacement window now
9If these are still the originals, they are inside their typical service life range. Worth budgeting for.
- Gas rangeKitchen · lasts 15–17 yrs
Burners and igniters wear first.
15–17 yrsIn its windowif original - Aluminum windowsWindows · lasts 15–20 yrs
Corroded tracks and failed seals are common. They also conduct heat and cold, so old ones are costly to run.
15–20 yrsIn its windowif original - Asphalt drivewayDeck & yard · lasts 15–20 yrs
Cracks let water in, which freezing then widens. Sealing and crack repair extend the life.
15–20 yrsIn its windowif original - Faucets and spray hoseBathroom · lasts 15–20 yrs
Drips and stiff handles mean worn cartridges or seals. A fix is usually cheap.
15–20 yrsIn its windowif original - Tankless water heaterWater heater · lasts 10–20 yrs
Scale buildup from hard water is the main enemy; periodic descaling helps it reach the long end. Sources differ widely, so treat the range as a guide.
10–20 yrsIn its windowif original - Flat roof (EPDM rubber)Roof · lasts 15–25 yrs
Seams, edges and penetrations leak first. Ponding water and punctures from foot traffic shorten life.
15–25 yrsIn its windowif original - Forced-air furnaceHeating & cooling · lasts 15–25 yrs
CPSC lists a breached heat exchanger, vent or chimney among the failures in furnace carbon monoxide incidents, and advises a professional inspection of fuel-burning heating every year. Keep a working CO alarm nearby. Frequent repairs and rising bills are signs of age.
15–25 yrsIn its windowif original - Deck framingDeck & yard · lasts 10–30 yrs
Check for hidden rot where the ledger meets the house and at the posts. A deck that bounces or sways should be checked before anyone uses it.
10–30 yrsIn its windowif original - Septic systemDrains & sewer · lasts 15–40 yrs
Regular pumping and inspection extend life; the drainfield usually fails first. Slow drains, odors and wet or unusually green ground over the drainfield are the warning signs.
15–40 yrsIn its windowif original
Past typical life, if still original
11Older than the usual range, but not so old that an original is unlikely. Worth finding out whether they have been replaced.
- Central air conditionerHeating & cooling · lasts 7–15 yrs7–15 yrs1 yr pastif original
- Electric rangeKitchen · lasts 13–15 yrs13–15 yrs1 yr pastif original
- Garage door openerGarage · lasts 10–15 yrs10–15 yrs1 yr pastif original
- Heat pumpHeating & cooling · lasts 10–15 yrs10–15 yrs1 yr pastif original
- Tank water heaterWater heater · lasts 6–15 yrs6–15 yrs1 yr pastif original
- Washing machineBathroom · lasts 5–15 yrs5–15 yrs1 yr pastif original
- Well pumpWater pipes · lasts ~15 yrs~15 yrs1 yr pastif original
- Wood deck boardsDeck & yard · lasts ~15 yrs~15 yrs1 yr pastif original
- Clothes dryerWhole house · lasts ~13 yrs~13 yrs3 yrs pastif original
- RefrigeratorKitchen · lasts 9–13 yrs9–13 yrs3 yrs pastif original
- Garbage disposalKitchen · lasts ~12 yrs~12 yrs4 yrs pastif original
Coming due in the next five years
6Not yet, but close enough to plan for.
- Aluminum gutters and downspoutsRoof · lasts 20–40 yrs20–40 yrsIn 4 yrsif original
- Asphalt shingle roof (3-tab)Roof · lasts ~20 yrs~20 yrsIn 4 yrsif original
- Flat roof (modified bitumen)Roof · lasts ~20 yrs~20 yrsIn 4 yrsif original
- Garage doorGarage · lasts 20–25 yrs20–25 yrsIn 4 yrsif original
- Vinyl or fiberglass windowsWindows · lasts 20–40 yrs20–40 yrsIn 4 yrsif original
- Water softenerWater pipes · lasts ~20 yrs~20 yrsIn 4 yrsif original
Replaced at least once by now: find out when8
A 2010 house has outlasted these parts’ typical life at least once over, so what matters is when each was last replaced. Ask the seller or check receipts and date labels; enter a year and the part moves up to where it stands.
- Carbon monoxide alarmWhole houselasts ~5 yrs≈3 lifetimes
- Dryer vent (plastic)Whole houselasts ~5 yrs≈3 lifetimes
- Sump pumpBasement & foundationlasts ~7 yrs≈2 lifetimes
- DishwasherKitchenlasts ~9 yrs≈1 lifetimes
- CarpetWalls, ceilings & floorslasts 8–10 yrs≈1 lifetimes
- Caulking (interior and exterior)Exterior wallslasts 5–10 yrs≈2 lifetimes
- Exterior paintExterior wallslasts 7–10 yrs≈1 lifetimes
- Smoke alarmWhole houselasts ~10 yrs≈1 lifetimes
Further out19
- Vinyl floorWalls, ceilings & floorslasts ~25 yrsin 9 yrs
- Wood shake roofRooflasts ~25 yrsin 9 yrs
- Asphalt shingle roof (architectural)Rooflasts ~30 yrsin 14 yrs
- GFCI outletsKitchenlasts ~30 yrsin 14 yrs
- Wood windowsWindowslasts ~30 yrsin 14 yrs
- Boiler (hot-water or steam)Heating & coolinglasts ~40 yrsin 24 yrs
- Chimney flue tileChimneylasts 40–120 yrsin 24 yrs
- Concrete walkwayDeck & yardlasts 40–50 yrsin 24 yrs
- Metal roofRooflasts 40–80 yrsin 24 yrs
- Cast-iron drain pipe (below ground)Drains & sewerlasts 50–60 yrsin 34 yrs
- Copper water supply linesWater pipeslasts 50–70 yrsin 34 yrs
- Electrical service panelElectrical panellasts ~60 yrsin 44 yrs
- Heating and cooling ductworkHeating & coolinglasts 60–100 yrsin 44 yrs
- Vinyl sidingExterior wallslasts ~60 yrsin 44 yrs
- Clay or concrete tile roofRooflasts ~100 yrsin 84 yrs
- Fiber cement sidingExterior wallslasts ~100 yrsin 84 yrs
- Fiberglass exterior doorWhole houselasts ~100 yrsin 84 yrs
- Hardwood floorWalls, ceilings & floorslasts ~100 yrsin 84 yrs
- ToiletsBathroomlasts ~100 yrsin 84 yrs
Typical lives from InterNACHI Standard Estimated Life Expectancy Chart for Homes, CPSC, U.S. Department of Energy (hosted guide), US Department of Energy, Energy Saver Guide (2022), InterNACHI, Smoke Alarm Inspection, US EPA, New Homebuyer's Guide to Septic Systems, InterNACHI and U.S. Consumer Product Safety Commission. Real lives vary with climate, quality and upkeep.
Your place
Add a ZIP code for a few sourced facts about where the house stands: the homes around it, radon, climate and flood maps. All optional.
Looking up a ZIP code needs JavaScript. Everything else on this page works without it.
Part two
The year in context
What was changing around 2010, how much the country was building, how houses of this era stand today and what homes were like then. All of it describes houses in general, never this one.
The year in context · events
Around 2010: what was changing in homebuilding
What happened in 2010 first, then the nearest dated events within 3 years either side. Each comes with its source and how strong that source is.
In 2010
- 2010
Industry
New single-family completions fall to 496 thousand
After the housing collapse only 496 thousand new single-family houses were completed in 2010, versus 1,636 thousand in 2005; heat pumps were in 38 percent of them.
U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)Primary sourceQuote
“2010 496 279 189 12 16 100 56 38 2 3” U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)
Nearby, 2007 to 2011within 3 years of 2010
- 2001–2009
Materials
Imported Chinese drywall used in houses
In this report’s record of issues: Problem drywall (Chinese drywall)
U.S. Consumer Product Safety CommissionPrimary sourceWikipediaReference - 2007
Industry
Median new house size reaches 2,277 square feet
The median new single-family house completed in 2007 had 2,277 square feet, before dipping to 2,135 square feet in 2009 and rising to a peak of 2,467 in 2015.
U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)Primary sourceQuotes
“2007 2,277” U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)
“2015 2,467 2,492 2,320 2,517 2,435 2,687 2,792 2,526 2,750 2,615” U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)
- 2008
Policy
EPA lead renovation, repair and painting rule
EPA's 2008 RRP Rule, amended in 2010 and 2011, requires lead-safe work practices and certified renovators for paid work disturbing paint in homes built before 1978.
U.S. Environmental Protection AgencyPrimary sourceQuote
“EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011)” U.S. Environmental Protection Agency
- 2011
Plumbing
Lead-free definition tightened to 0.25 percent
In 2011 Congress passed the Reduction of Lead in Drinking Water Act lowering the lead content of wetted plumbing surfaces from 8 percent to a weighted average of 0.25 percent.
U.S. Environmental Protection AgencyPrimary sourceQuote
“In 2011 Congress passed the Reduction of Lead in Drinking Water Act (RLDWA) revising the definition of lead free” U.S. Environmental Protection Agency
Events come from a researched timeline of 150 dated changes to US homebuilding, each checked against the quoted source. Primary source is a government or standards body, Trade reference a trade body and Reference a general reference such as Wikipedia. A date is when something began or became required, not when every builder followed.
The year in context · building
Housing that year
How many new homes were started across the US in 2010, against every year since 1889. It is the whole country’s building, houses and apartments, not a count of houses like this one.
New homes started · 2010 · US
About 587,000 new homes (houses and apartments) were started in 2010, well below the long-run median of about 1.1 million a year, and 6% more than in 2009.
- Started
- 587,000
- Median new house price
- $221,8002010 $
- In one-family buildings
- 80%
- Before 1959 the counts are historical estimates: Historical Statistics of the United States reconstructed them from building permits and other records, in series that change method in 1920, 1930 and 1945. They leave out farm housing. The figures here were transcribed by hand from a scanned copy and checked against the table’s own totals.
- From 1959 the count is the Census Bureau’s privately owned housing units started; public housing is not in it. Mobile homes, conversions and temporary units are never counted.
- The median new house price is in the dollars of 2010, not adjusted for inflation.
Source US Census Bureau, Historical Statistics of the United States, Colonial Times to 1970, Series N 156 (1889–1958); New Residential Construction, annual housing starts (1959–2025); New Residential Sales, median sales price of new houses sold.
As built · new houses of 2010
The typical new house of 2010
How new single-family houses completed in 2010 across the US were built, from the US Census Bureau’s Survey of Construction. These describe that year’s new houses, not this one, and a house may have been altered since.
Showing the whole US · choose your state above, or a region here
New houses · 2010 · US
Most often: one or two stories, on a slab or other foundation, vinyl siding outside, gas heat and air-conditioning.
- Median size
- 2,169sq ft
- Completed
- 496,000houses
Median size, sq ft
Floors
50% 2 stories (incl. 1½ and split-level)
- 1 story47%
- 2 stories50%
- 3 or more3%
- Floors are counted two ways: through 2008, 1 story, 2 or more, and split-level; from 2009, split-level and 1½-story houses count as 2 stories and 3 or more is separate. Only “1 story” is roughly comparable across the change.
2 stories, over time
Foundation
52% Slab or other (piers, pilings)
- Basement30%
- Slab or other52%
- Crawl space18%
- The Census counts slabs together with other foundations such as piers and pilings, so this is “slab or other”, never slab alone.
Slab or other, over time
Outside walls
36% Vinyl siding
- Brick23%
- Wood8%
- Stucco17%
- Vinyl siding36%
- Fiber cement13%
- Other2%
- Aluminum siding is counted inside “other”, with block and stone.
Vinyl siding, over time
Heating fuel
54% Gas (natural or bottled)
- Gas54%
- Electricity43%
- Oil1%
- Other or none2%
- Gas includes bottled gas and propane as well as natural gas.
Gas (natural or bottled), over time
Heating system
56% Forced-air furnace
- Forced-air furnace56%
- Heat pump38%
- Hot water or steam2%
- Other or none3%
Forced-air furnace, over time
Air-conditioning
88% With air-conditioning
- With air-conditioning88%
- Without12%
With air-conditioning, over time
Bedrooms
52% 3 bedrooms
- 2 or fewer13%
- 352%
- 4 or more35%
3 bedrooms, over time
Bathrooms
36% 2 bathrooms
- 1½ or fewer8%
- 236%
- 2½32%
- 3 or more25%
2 bathrooms, over time
Garage
63% 2-car garage
- 1-car garage6%
- 2-car garage63%
- 3+ car garage16%
- Carport1%
- None13%
2-car garage, over time
Fireplaces
51% No fireplace
- None51%
- 143%
- 2 or more6%
No fireplace, over time
- These are new single-family houses completed that year in that region, including houses built for rent. They describe how houses were being built, not any one house.
- These are survey estimates. Sampling error is larger for older years, for single regions and for small categories; “withheld” marks cells the Census did not publish.
- Roofing is not recorded by this survey. Houses were not counted by state, so a region is the closest view.
Source US Census Bureau, Survey of Construction (Characteristics of New Housing), houses completed. Tables: Stories, Foundation, Exterior Wall Material, Heating Fuel, Heating System, Air-Conditioning, Bedrooms, Bathrooms, Parking Facility, Fireplaces, Square feet.
As they stand today · houses built 2010 or later
Houses of 2010 or later, today
The typical new house above is how houses were built in 2010. This is the other view: houses built 2010 or later that are still standing and lived in, as they are now, after decades of new roofs, new siding and renovation. Not as they were built.
Showing the whole US · detached single-family houses
Roofs today · built 2010 to 2015 · US
About 4 in 5 surviving houses built 2010 to 2015 across the US have asphalt shingle roofs today, and about 1 in 12 has clay tile.
Roof material as reported in 2020. Most roofs have been replaced at least once since these houses were built, so this is what is on them now.
- Homes sampled
- 586
- Average size
- 2,708sq ft
- Asphalt shingles80%
- Metal4%
- Wood shakes5%
- Slate1%
- Clay tile8%
- Concrete tile2%
- Other1%
586 homes sampled · EIA RECS 2020
Asphalt shingles, by era built
Roof, walls, window glass and stories come from the EIA survey, which can only group houses built 2010 to 2015. Everything else comes from the American Housing Survey’s finer band: houses built 2010 or later.
The shell
Outside walls
41% Siding: vinyl, aluminum, fiber cement or steel
- Siding41%
- Brick26%
- Wood8%
- Stucco18%
- Stone4%
- Concrete block3%
- Other1%
586 homes sampled · EIA RECS 2020
Siding, by era built
Window glass
85% Double-pane
- Single-pane13%
- Double-pane85%
- Triple-pane2%
586 homes sampled · EIA RECS 2020
Double-pane, by era built
Foundation
58% Slab
- Full basement23%
- Part basement4%
- Crawl space14%
- Slab58%
- Other1%
2,654 homes sampled · AHS 2023
Slab, by era built
Stories
52% 1 story
- 1 story52%
- 2 stories45%
- 3 or more2%
- Split-level1%
586 homes sampled · EIA RECS 2020
1 story, by era built
Heating and cooling
Main heating fuel
50% Electricity
- Gas42%
- Electricity50%
- Oil1%
- Propane6%
- Wood1%
- Other1%
2,654 homes sampled · AHS 2023
Electricity, by era built
Main heating equipment
76% Forced warm-air furnace
- Furnace76%
- Boiler1%
- Heat pump17%
- Electric baseboard1%
- Wall or room heater3%
- Stove or fireplace1%
- Other or none1%
2,654 homes sampled · AHS 2023
Forced warm-air furnace, by era built
Air-conditioning
94% Central air
- Central air94%
- Room units only3%
- None3%
2,654 homes sampled · AHS 2023
Central air, by era built
The rooms
Bathrooms
40% Three or more
- No full bath<0.5%
- 14%
- 1½2%
- 228%
- 2½26%
- 3+40%
2,654 homes sampled · AHS 2023
Three or more, by era built
Fireplace
51% No usable fireplace
- Usable fireplace49%
- None51%
2,654 homes sampled · AHS 2023
No usable fireplace, by era built
Size
45% 2,500 sq ft or more
- Under 1,0002%
- 1,000–1,49910%
- 1,500–1,99922%
- 2,000–2,49921%
- 2,500+45%
2,539 homes sampled · AHS 2023
2,500 sq ft or more, by era built
Garage or carport
94% Garage or carport
- Garage or carport94%
- Neither7%
2,642 homes sampled · AHS 2023
Garage or carport, by era built
- Surviving detached single-family houses as they are today, by the decade their occupants say they were built. Roofs, siding, windows and heating include every replacement since. Houses that were torn down are not in it, so this is not how the era built.
- In the Census Bureau’s words, “some of the home characteristics … may have been more recent additions or installations and did not come with the home when it was originally built.”
- Survey estimates from samples of homes: a band with fewer than 30 sampled homes is never shown, and one with fewer than 100 is marked small sample. The EIA survey covers occupied primary homes only; the American Housing Survey also counts vacant ones.
Source US Energy Information Administration, Residential Energy Consumption Survey 2020, public microdata (roof, walls, window glass, stories, size); US Census Bureau and HUD, American Housing Survey 2023, national public use file (everything else); shares computed from the public microdata with the surveys’ weights. Caveat quoted from Census working paper 2011-18.
The year in context · the country
The country’s homes today
The decennial census stopped collecting these details after 2000, so for a house built in 2010 there is only today’s count.
| Fact | US |
|---|---|
| Homes built in the 2010s still standing todayACS 2020-2024, B25034 | 13.6 million 9.4% of homes |
| Half of all homes standing today were built beforethe median year builtACS 2020-2024, B25035 | 1980 |
Today’s count is the US Census Bureau’s American Community Survey, 2020 to 2024, which includes vacant homes and dates them by what residents report. Choose your state above to see it beside the US.
See something in the 2010 report that looks wrong?Report an error on this page