Year Built

Report · houses built in

What a house built in 2005 often has

Age
21yrs
On record
20
Check first
3
Built without
2

Choose one to hide issues that only apply elsewhere.

About your house

A few optional answers make this report specific to one house.

0 of 11 questions answered.

Headline findingCheck first

Problem drywall (Chinese drywall)

2001–2009 · 2005 is in the peak yearsCourt record: Dates come from a court settlement or a product recall.

Some houses built or renovated from 2001 to 2009, mostly in Florida and the Gulf states, got imported drywall that gives off sulfur gases and blackens copper.

Problem drywall (Chinese drywall): 2001–2009; the line is 2005.

20 things on record apply to a 2005 house: 3 to check first, 2 protections it was built without, and 15 more by part of the house.

Check these first

The 3 items most worth a look in a 2005 house: safety first, then cost.

  1. Check firstOften presentFL LA MS AL +1

    Problem drywall (Chinese drywall)

    Some houses built or renovated from 2001 to 2009, mostly in Florida and the Gulf states, got imported drywall that gives off sulfur gases and blackens copper.

    How to checkWalls, ceilings & floors · Heating & cooling · Wiring & outlets · Attic
    1. Look at the copper tubing on the air conditioner's indoor coil: blackened copper, not green, is CPSC's warning sign. An electrician can check the bare ground wires in outlet and switch boxes for the same thing.
    2. Note any sulfur or rotten-egg smell, or repeated air-conditioner coil failures.
    3. In the attic, look at the back of exposed drywall for Chinese manufacturer markings.
    4. A lab test of the drywall or the copper corrosion confirms it.

    If you find itIf the signs line up, follow CPSC and HUD's identification and remediation guidance and get a specialist inspection. A Senate hearing record described the Louisiana court remediation protocol at about $86 per square foot, more than $200,000 for a 2,400-square-foot home. No open settlement program was found.

    How commonCPSC has about 4,051 reports. In March 2010, over 90% came from Florida (59%), Louisiana (20%), Mississippi (6%), Alabama (5%) and Virginia (4%). Even there it is a small share of houses built in these years.

    Keep in mindCPSC asks for more corroborating evidence for 2001 to 2004 installs than for 2005 to 2009, which shows where the problem concentrates. Renovations in this period could have brought it into older houses, and reports came from 44 states, not only the five listed.

    Details and 5 sources →

    2001–20092005 is in the peak years

    Court record: Dates come from a court settlement or a product recall.Rare
  2. Check firstOften present

    Gree-made dehumidifiers (2013 recall)

    About 2.5 million dehumidifiers sold from 2005 to 2013 under 13 brand names, including Frigidaire, Kenmore and GE, can overheat and catch fire.

    How to checkBasement & foundation
    1. Look in the basement, crawlspace entry and laundry area for a portable dehumidifier.
    2. Read the brand and pint capacity on the front.
    3. Find the sticker with the model number and date code on the back, front or side of the unit.
    4. Compare the model and date code with the tables on the CPSC recall notice. Many Gree and SoleusAir models are listed as all units.

    If you find itIf it matches, unplug it and stop using it. The remedy was a refund from Gree, not a repair; check the recall notice for whether refunds are still offered.

    How commonAbout 2.2 million units were recalled in the US in 2013, rising to about 2.5 million with the GE-brand expansion; no count of affected homes exists.

    Keep in mindA dehumidifier is a portable appliance, so it may have come with the house or been bought later for a house of any age. A separate 2023 Gree recall covers other models made 2011 to 2014.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 9 sources →

    2005–2013

    Court record: Dates come from a court settlement or a product recall.No reliable count exists
  3. Check firstOften present

    Kidde NightHawk hard-wired smoke/CO alarms (2016 recall)

    A popular hard-wired smoke and CO alarm from 2004 to 2010 can go quiet at the end of its life, so it seems fine when it is not.

    How to checkWhole house
    1. Look for white round alarms 5 to 6 inches across with 'Kidde' engraved on the front.
    2. Twist one off its ceiling base (it stays wired to a plug) and read the label on the back.
    3. Look for model KN-COSM-IB with a manufacture date between June 1, 2004 and December 31, 2010.
    4. A compartment on the back for a 9-volt backup battery is another sign of this model.

    If you find itIf it matches, contact Kidde about a replacement and check the recall notice for whether the offer is still open. Any alarm made in these years is well past its stated life, so replace it either way.

    How commonAbout 3.6 million units were recalled in the US; no count of affected homes exists.

    Keep in mindNo one knows how many went into new houses versus replacement installs. Alarms get swapped over the years, so read the label rather than going by build year.

    Details and 6 sources →

    2004–2010

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

Built without

Protections that became standard after 2005. A house keeps what it was built with unless someone added them, and many have been.

  • Outlets without child-safety shutters

    Built 2010 or earlier · peakSince the 2008 electrical code, new houses get outlets with built-in shutters that stop a child pushing a key or hairpin into the slot.

    Since the 2008 electrical code, new houses get outlets with built-in shutters that stop a child pushing a key or hairpin into the slot.

    Read the full entry →

    Built 2010 or earlier2005 is in the peak years

    Federal rule: Dates come from a federal rule or a model building code.No reliable count exists

    How to check

    1. Look closely at an outlet: 'TR' embossed on the face between the slots means tamper-resistant.
    2. You can see plastic shutters inside the slots.

    If you find itIf small children live in or visit the house, have outlets replaced with TR-listed ones.

    How commonNo reliable count exists. Houses built before their state adopted the 2008 code will generally lack them unless outlets were replaced.

    Keep in mind2008 is the model code year; states adopted it at different times. As of 2016, the rule did not apply to manufactured homes.

    Details and 3 sources →
  • Built before mandatory airtightness testing (2012 energy code)

    Built 2015 or earlierThe 2012 energy code was the first to make new houses pass a whole-house air leakage test.

    The 2012 energy code was the first to make new houses pass a whole-house air leakage test.

    Read the full entry →

    Built 2015 or earlier

    Federal rule: Dates come from a federal rule or a model building code.Likely

    How to check

    1. Look near the electrical panel or furnace for an energy code certificate or a posted blower-door test result.
    2. Ask the seller or builder whether a blower-door test or energy rating was done.
    3. Notice drafts around outlets, attic hatches, recessed lights and window trim on a cold or windy day.

    If you find itNothing is required. If the house feels drafty or bills are high, an energy audit with a blower-door test shows where air sealing would help most.

    How commonHouses built before their state adopted the 2012 code were not required to pass this test. Adoption dates by state were not researched.

    Keep in mindThis is a model code. States and cities adopted it at different times, so the end year here is stretched a few years and is soft. Check your state's adoption date.

    Details and 3 sources →

Everything else, by part of the house

Materials and products often installed in 2005. Open any row for how to check.

Where to look. Each number counts the items in this report for that part of the house.

Electrical1

  • Counterfeit Square D circuit breakers (mid-2000s recalls)

    2003–2006 · peakIn the mid-2000s fake breakers labeled Square D were sold through distributors, and they may not trip on an overload.

    In the mid-2000s fake breakers labeled Square D were sold through distributors, and they may not trip on an overload.

    Read the full entry →

    2003–20062005 is in the peak years

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Open the panel door and look for black breakers labeled Square D QO or QOB.
    2. On genuine breakers (except some made before 2003) the amp rating is written in white paint on the handle.
    3. Ask an electrician to check the hidden signs: a Square D insignia molded on the side and a yellow chromate mounting clip.

    If you find itIf a breaker looks wrong, have an electrician replace it. The distributor named in the matching recall notice may offer inspection and replacement or a refund.

    How commonThe five recalls together cover roughly 560,000 breakers; no count of affected homes exists.

    Keep in mindEach recall covers a different distributor and sale window, so the years here are approximate. Breakers are swapped in panels of any age.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 9 sources →

Plumbing & water2

  • Kitec plumbing

    1992–2007 · peakKitec plumbing, often bright orange and blue pipe with brass fittings, was recalled by its maker in 2005 because the fittings corrode quickly.

    Kitec plumbing, often bright orange and blue pipe with brass fittings, was recalled by its maker in 2005 because the fittings corrode quickly.

    Read the full entry →

    1992–20072005 is in the peak years

    Approximate era: Dates are an approximate era drawn from trade and reference sources.Rare

    How to check

    1. Look at the water heater, under sinks and at any manifold: Kitec pipe is usually bright orange (hot) and bright blue (cold).
    2. Read the print on the pipe for the Kitec name.
    3. Brass fittings are stamped 'Kitec' or 'KTC'.
    4. Some houses have a warning sticker inside the electrical panel door.

    If you find itIf you find it, talk to a plumber about replacing it; a full repipe is the usual fix. No open compensation program was found.

    How commonInterNACHI counts at least 60,000 homes in southern Nevada and New Mexico from lawsuits filed, and says tens of thousands more are likely in parts of Arizona, California and Texas. Nationally it is rare.

    Keep in mindThe 1995 to 2007 window is the commonly quoted one; InterNACHI says it was in use from the early 1990s, and the end year is unconfirmed. It is concentrated in a few western markets, and most houses of the era never had it.

    Details and 2 sources →
  • Rheem and Paloma power-vent tankless water heaters (2007 recall)

    2004–2006A batch of gas tankless water heaters sold from 2004 to 2006 could build up dust and produce carbon monoxide.

    A batch of gas tankless water heaters sold from 2004 to 2006 could build up dust and produce carbon monoxide.

    Read the full entry →

    2004–2006

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Check whether the water heater is a wall-mounted tankless unit branded Rheem or Paloma.
    2. Read the model number on its label and compare it with the list on the CPSC notice.
    3. Check that the air filter door is in place.

    If you find itIf it matches, contact the installer or Rheem about the free on-site repair, and check the notice for whether it is still offered. Keep a working CO alarm nearby.

    How commonAbout 42,200 units were recalled; no count of affected homes exists. Tankless heaters are a minority: EIA's 2020 survey found one as the main water heater in about 8 million of 123.5 million US homes.

    Keep in mindTankless heaters are often fitted when an older tank fails, so they turn up in houses of any age.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 7 sources →

Kitchen & bath2

  • Bosch and Siemens dishwashers (2009 recall)

    1999–2006 · peakSome Bosch and Siemens built-in dishwashers made from 1999 to 2005 have a part that can overheat and start a fire.

    Some Bosch and Siemens built-in dishwashers made from 1999 to 2005 have a part that can overheat and start a fire.

    Read the full entry →

    1999–20062005 is in the peak years

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Check the brand on the front control panel: Bosch or Siemens.
    2. Open the door and find the model and serial number label on the upper right edge of the inner door.
    3. Bosch models SHE43C, SHE44C, SHE46C, SHE56C, SHU33, SHU42, SHU432, SHU43C and SHU53A, and Siemens SL34A, are on the list. Compare the serial number with the range on the CPSC notice.

    If you find itIf it matches, stop using it and contact BSH as the 2009 notice directs; check the notice for whether the free repair is still offered. A dishwasher this old may be due for replacement anyway.

    How commonAbout 476,500 units were recalled; no count of affected homes exists.

    Keep in mindMany dishwashers from these years have since been replaced. A house built in this window is the likeliest to still have an original one.

    Details and 5 sources →
  • Kidde plastic-handle fire extinguishers (2017 recall)

    1973–2017Kidde recalled about 37.8 million fire extinguishers because some may not spray when you need them.

    Kidde recalled about 37.8 million fire extinguishers because some may not spray when you need them.

    Read the full entry →

    1973–2017

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Look under the kitchen sink, in the pantry, garage and utility room for any Kidde extinguisher.
    2. Note whether it has a plastic handle (red, white or silver models) or a push-button Pindicator top.
    3. Read the model number on the label and compare it with the model list on the CPSC recall notice.
    4. On units made in 2007 or later, a 10-digit date code is printed on the side of the cylinder near the bottom.

    If you find itIf the model is on the list, replace it and contact Kidde through the product safety recall page on kidde.com. Check the recall notice for whether the replacement offer is still open.

    How commonAbout 37.8 million units were recalled in the US; no count of affected homes exists.

    Keep in mindExtinguishers are bought, not built in, so the year a house was built predicts little: owners add them to houses of every age. The recall did not cover every Kidde extinguisher, only the listed models.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 4 sources →

Heating, cooling & chimney2

  • Rinnai EnergySaver wall furnaces (2008 recall)

    2000–2007Some Rinnai direct-vent wall heaters made from 2000 to 2007 have a gasket that can fail and leak carbon monoxide.

    Some Rinnai direct-vent wall heaters made from 2000 to 2007 have a gasket that can fail and leak carbon monoxide.

    Read the full entry →

    2000–2007

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Look for a Rinnai heater mounted on an outside wall with its vent going straight through the wall.
    2. Find the rating plate on the right side of the unit; the model number is at the top.
    3. Look for RHFE-431 or RHFE-556 (with FAIII, WTA or WTA-72B/76B suffixes).
    4. The first four digits of the serial number, at the bottom of the plate, are the year and month made: 0002 through 0712 are in the recall window.

    If you find itIf it matches, contact Rinnai about the free repair kit using the details on the recall notice, and check the notice for whether it is still offered. Make sure there is a working CO alarm nearby.

    How commonAbout 52,000 units were recalled; no count of affected homes exists.

    Keep in mindWall heaters are often added to older houses and additions, so build year is a weak guide here. The rating plate is what tells you.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 5 sources →
  • R-22 (Freon) air conditioner

    Built 2009 or earlierSince January 1, 2010, EPA has barred making new air conditioners or pre-charged parts with R-22, and US production and import of the refrigerant ended in 2020.

    Since January 1, 2010, EPA has barred making new air conditioners or pre-charged parts with R-22, and US production and import of the refrigerant ended in 2020.

    Read the full entry →

    Built 2009 or earlier

    Federal rule: Dates come from a federal rule or a model building code.No reliable count exists

    How to check

    1. Read the data plate on the outdoor unit: 'R-22' or 'HCFC-22' means the old refrigerant; newer units say R-410A, R-454B or R-32.
    2. The manufacture date is usually on the same plate.

    If you find itNothing to do while it works. Budget for replacing the outdoor unit and indoor coil together when it fails.

    How commonNo reliable count exists of pre-2010 units still in service.

    Keep in mindAir conditioning is often added or replaced long after a house is built, so the unit's age matters far more than the house's.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 5 sources →

Roof & attic3

  • Atlas Chalet and Stratford shingles

    1998–2010Atlas Chalet and Stratford shingles, sold from at least 1998 until 2010, drew federal lawsuits, and in 2017 a federal court in Georgia denied class certification.

    Atlas Chalet and Stratford shingles, sold from at least 1998 until 2010, drew federal lawsuits, and in 2017 a federal court in Georgia denied class certification.

    Read the full entry →

    1998–2010

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Look at the roof from the ground: they resemble three-tab shingles with a darker printed shadow band across each tab.
    2. Look for small pock-like blisters and bald spots.
    3. Roofers in the Southeast tend to recognize them on sight.

    If you find itHave a roofer look if you see blistering. No class settlement was found, so replacement is usually at the owner's cost unless an insurer accepts a storm claim, and because they are discontinued, matching repairs is difficult.

    How commonNo reliable count exists, and no data on where they were most used was found.

    Keep in mindThe first year of sale is uncertain; the court says only 'in the 1990s'. Many roofs from this period have been replaced, and most houses of the era have other shingles.

    Details and 4 sources →
  • CertainTeed organic shingles

    1987–2006CertainTeed estimated that about 1.86 million buildings got its felt-based organic shingles between 1987 and 2005, and a class settlement followed.

    CertainTeed estimated that about 1.86 million buildings got its felt-based organic shingles between 1987 and 2005, and a class settlement followed.

    Read the full entry →

    1987–2006

    Court record: Dates come from a court settlement or a product recall.Rare

    How to check

    1. Look for CertainTeed wrappers, invoices or warranty papers and check whether they describe an organic (felt) shingle rather than fiberglass.
    2. A torn shingle shows a brown or black felt core rather than white glass fibers.
    3. Heavy curling at tab corners and blistering on an old roof are typical of organic shingles.

    If you find itIf the roof is failing, re-roof. Contact CertainTeed to ask whether claims are still possible; the claim deadline could not be confirmed.

    How commonCertainTeed's own estimate in court: about 1,857,000 structures were built with these shingles from 1987 to 2005, a small share of roofs laid in those years.

    Keep in mindMany roofs from this period have already been replaced, and the older the house, the less likely the original roof survives. Installation could trail manufacture by a year or so.

    Details and 3 sources →
  • Factory-built roof trusses

    Built 1955 or laterIf your attic is a web of diagonal 2x4s joined by toothed metal plates, the roof is built from factory trusses, and cutting even one can badly weaken it.

    If your attic is a web of diagonal 2x4s joined by toothed metal plates, the roof is built from factory trusses, and cutting even one can badly weaken it.

    Read the full entry →

    Built 1955 or later

    Approximate era: Dates are an approximate era drawn from trade and reference sources.No reliable count exists

    How to check

    1. In the attic, look for diagonal 2x4s forming W or M shapes, joined by toothed galvanized steel plates.
    2. Rafters, by contrast, are larger boards running from the ridge to the wall with open space between.
    3. Look for cut or notched members and plates that have backed out of the wood.

    If you find itNothing is needed unless trusses are damaged or altered. Before any attic conversion, skylight or other change that touches a truss, get an engineer's design.

    How commonNo reliable count exists for houses by year built.

    Keep in mindTruss use grew over decades, and many houses still use rafters, especially custom homes and complex roofs. A reference source dates the connector plate to 1955.

    Details and 1 source →

Exterior walls & windows1

  • Pella ProLine casement windows

    1991–2009Pella ProLine aluminum-clad wood casement, awning and transom windows made from 1991 to 2009 were the subject of a class settlement over claims that water could get in and rot the wood.

    Pella ProLine aluminum-clad wood casement, awning and transom windows made from 1991 to 2009 were the subject of a class settlement over claims that water could get in and rot the wood.

    Read the full entry →

    1991–2009

    Court record: Dates come from a court settlement or a product recall.No reliable count exists

    How to check

    1. Look for the Pella name etched in a corner of the glass or on the hardware.
    2. These windows have aluminum cladding outside and wood inside.
    3. Check the bottom of each sash for soft or stained wood.

    If you find itReplace rotted sashes or whole units. The settlement's claim deadline could not be confirmed, so contact Pella or the settlement administrator to ask whether claims are still open.

    How commonNo reliable count exists. This is one product line from one maker.

    Keep in mindOnly casement, awning and transom windows in this line were covered. Windows are often replaced, so these can also turn up in older houses.

    Details and 2 sources →

Foundation & basement3

  • Yellow CSST gas tubing without bonding

    1990–2011Flexible yellow stainless-steel gas tubing can be damaged by a nearby lightning strike, and older installs may lack the bonding wire that reduces the risk.

    Flexible yellow stainless-steel gas tubing can be damaged by a nearby lightning strike, and older installs may lack the bonding wire that reduces the risk.

    Read the full entry →

    1990–2011

    Approximate era: Dates are an approximate era drawn from trade and reference sources.No reliable count exists

    How to check

    1. Look at exposed gas piping in the basement, attic, crawl space or at the furnace and water heater: flexible corrugated tubing in a yellow jacket is CSST (black-jacketed tubing is a newer type).
    2. Look for bonding: a clamp on a rigid gas fitting with a bare or green copper wire running to the electrical panel or grounding system.

    If you find itIf you have yellow CSST and see no bonding wire, have a licensed electrician bond it following the tubing maker's instructions and current code. It is a small job.

    How commonNo reliable count exists. It applies only to houses with gas service.

    Keep in mindThe start year and the code year that made bonding mandatory were not confirmed, and states adopted codes at different times. CSST is still installed today, with bonding.

    Details and 2 sources →
  • Crumbling concrete foundations (pyrrhotite)

    1983–2015CT MAIn parts of north-central Connecticut and central Massachusetts, some foundations poured with local quarry stone are crumbling because of a mineral called pyrrhotite.

    In parts of north-central Connecticut and central Massachusetts, some foundations poured with local quarry stone are crumbling because of a mineral called pyrrhotite.

    Read the full entry →

    1983–2015

    Approximate era: Dates are an approximate era drawn from trade and reference sources.No reliable count exists

    How to check

    1. In the basement, look at the foundation walls for horizontal cracks and map-pattern (spider-web) cracking.
    2. Look for white powdery deposits, rust-brown staining and flaking.
    3. A clean-looking wall does not rule it out; a licensed engineer's visual inspection and a core sample tested for pyrrhotite confirm it.

    If you find itIf you are in an affected area, have a licensed engineer inspect the foundation, especially before buying, and check with your state about any current testing or repair assistance.

    How commonNo reliable count exists. The problem is tied to aggregate from certain local quarries, so it is limited to parts of central Connecticut and Massachusetts.

    Keep in mindThe 1983 to 2015 window comes from state officials' figures that could not be independently confirmed, and only towns near the source quarries are affected. Most houses in Connecticut and Massachusetts are not at risk.

    Details and 2 sources →
  • Engineered I-joist floors

    Built 1970 or later · peakBy 2005 about half of wood light-frame floors used engineered I-joists, which perform well day to day but can fail quickly in a fire if left exposed.

    By 2005 about half of wood light-frame floors used engineered I-joists, which perform well day to day but can fail quickly in a fire if left exposed.

    Read the full entry →

    Built 1970 or later2005 is in the peak years

    Approximate era: Dates are an approximate era drawn from trade and reference sources.Possible

    How to check

    1. Look up at the basement or garage ceiling for I-shaped joists: a thin OSB or plywood web with small lumber flanges top and bottom.
    2. They are usually printed with the maker's brand name.
    3. If you can see them, they are unprotected from below.

    If you find itConsider covering exposed I-joists with drywall, and make sure working smoke alarms cover every level, including the basement.

    How commonWikipedia: about 50% of wood light-frame floors used I-joists as of 2005.

    Keep in mindNewer model codes are reported to require covering them, but that was not confirmed and code adoption varies by state. The hazard applies only where the joists are exposed.

    Details and 2 sources →

Garage, deck & yard1

  • Recalled LP composite decking

    2005–2008About 48 million linear feet of LP WeatherBest, ABTCo and Veranda composite decking sold from 2005 to 2008 was recalled because boards could break underfoot.

    About 48 million linear feet of LP WeatherBest, ABTCo and Veranda composite decking sold from 2005 to 2008 was recalled because boards could break underfoot.

    Read the full entry →

    2005–2008

    Court record: Dates come from a court settlement or a product recall.Rare

    How to check

    1. Look at the deck boards: uncapped composite is the same color and texture all the way through, with no plastic shell.
    2. Recalled LP boards may be soft, swollen, flaking or cracked, especially in damp shade.
    3. Look for a brand name printed on the underside or end of a board.

    If you find itCheck CPSC recall 09-217 and contact Louisiana-Pacific about the free inspection and replacement; it was not confirmed whether that remedy is still honored. Replace any soft or cracked boards.

    How commonCPSC: about 48 million linear feet recalled. No count of affected houses exists.

    Keep in mindThese are sale dates, and decks are often added long after a house is built, so build year predicts this poorly. Most decks of this period are wood or other brands.

    Year predicts poorlyThis is often added to older houses later, so check whatever the build year.

    Details and 2 sources →

What’s due at this age

A 2005 house is 21 years old. Here is where its parts stand against their typical life, and which ones have certainly been replaced by now.

In their window
7
Past life, if original
16
Due within 5 yrs
2
Replaced by now
11

11 of the 53 parts we track wear out so much faster than a 2005 house has stood that they have been replaced at least once. Know when something was last replaced? Enter the year (or a decade, like 2010s) and we’ll show where that part stands. It stays on this device only.

In the replacement window now

7

If these are still the originals, they are inside their typical service life range. Worth budgeting for.

  • Flat roof (EPDM rubber)Roof · lasts 15–25 yrs

    Seams, edges and penetrations leak first. Ponding water and punctures from foot traffic shorten life.

    15–25 yrsIn its windowif original
  • Forced-air furnaceHeating & cooling · lasts 15–25 yrs

    CPSC lists a breached heat exchanger, vent or chimney among the failures in furnace carbon monoxide incidents, and advises a professional inspection of fuel-burning heating every year. Keep a working CO alarm nearby. Frequent repairs and rising bills are signs of age.

    15–25 yrsIn its windowif original
  • Garage doorGarage · lasts 20–25 yrs

    Springs and cables wear with every use. CPSC says a door that sticks, binds or is out of balance should be serviced by a professional, and InterNACHI warns that springs are under very high tension and can snap, so do not adjust them yourself.

    20–25 yrsIn its windowif original
  • Deck framingDeck & yard · lasts 10–30 yrs

    Check for hidden rot where the ledger meets the house and at the posts. A deck that bounces or sways should be checked before anyone uses it.

    10–30 yrsIn its windowif original
  • Aluminum gutters and downspoutsRoof · lasts 20–40 yrs

    Sagging, leaking seams and water spilling over the edge are the signs. Failed gutters send water to the foundation.

    20–40 yrsIn its windowif original
  • Septic systemDrains & sewer · lasts 15–40 yrs

    Regular pumping and inspection extend life; the drainfield usually fails first. Slow drains, odors and wet or unusually green ground over the drainfield are the warning signs.

    15–40 yrsIn its windowif original
  • Vinyl or fiberglass windowsWindows · lasts 20–40 yrs

    Fogging between panes means the seal has failed. Warped frames and drafts are other signs.

    20–40 yrsIn its windowif original

Past typical life, if still original

16

Older than the usual range, but not so old that an original is unlikely. Worth finding out whether they have been replaced.

  • Aluminum windowsWindows · lasts 15–20 yrs
    15–20 yrs1 yr pastif original
  • Asphalt drivewayDeck & yard · lasts 15–20 yrs
    15–20 yrs1 yr pastif original
  • Asphalt shingle roof (3-tab)Roof · lasts ~20 yrs
    ~20 yrs1 yr pastif original
  • Faucets and spray hoseBathroom · lasts 15–20 yrs
    15–20 yrs1 yr pastif original
  • Flat roof (modified bitumen)Roof · lasts ~20 yrs
    ~20 yrs1 yr pastif original
  • Tankless water heaterWater heater · lasts 10–20 yrs
    10–20 yrs1 yr pastif original
  • Water softenerWater pipes · lasts ~20 yrs
    ~20 yrs1 yr pastif original
  • Gas rangeKitchen · lasts 15–17 yrs
    15–17 yrs4 yrs pastif original
  • Central air conditionerHeating & cooling · lasts 7–15 yrs
    7–15 yrs6 yrs pastif original
  • Electric rangeKitchen · lasts 13–15 yrs
    13–15 yrs6 yrs pastif original
  • Garage door openerGarage · lasts 10–15 yrs
    10–15 yrs6 yrs pastif original
  • Heat pumpHeating & cooling · lasts 10–15 yrs
    10–15 yrs6 yrs pastif original
  • Tank water heaterWater heater · lasts 6–15 yrs
    6–15 yrs6 yrs pastif original
  • Washing machineBathroom · lasts 5–15 yrs
    5–15 yrs6 yrs pastif original
  • Well pumpWater pipes · lasts ~15 yrs
    ~15 yrs6 yrs pastif original
  • Wood deck boardsDeck & yard · lasts ~15 yrs
    ~15 yrs6 yrs pastif original

Coming due in the next five years

2

Not yet, but close enough to plan for.

  • Vinyl floorWalls, ceilings & floors · lasts ~25 yrs

    Curling seams and cracks let water reach the subfloor. Very old sheet vinyl can have an asbestos backing, and CPSC says scraping or sanding it can release fibers, so do not sand or scrape it.

    ~25 yrsIn 4 yrsif original
  • Wood shake roofRoof · lasts ~25 yrs

    Moss, rot and splitting shorten life. Wood roofs also burn more readily than most, so check local fire rules before replacing like for like.

    ~25 yrsIn 4 yrsif original
Replaced at least once by now: find out when11

A 2005 house has outlasted these parts’ typical life at least once over, so what matters is when each was last replaced. Ask the seller or check receipts and date labels; enter a year and the part moves up to where it stands.

  • Carbon monoxide alarmWhole houselasts ~5 yrs≈4 lifetimes
  • Dryer vent (plastic)Whole houselasts ~5 yrs≈4 lifetimes
  • Sump pumpBasement & foundationlasts ~7 yrs≈3 lifetimes
  • DishwasherKitchenlasts ~9 yrs≈2 lifetimes
  • CarpetWalls, ceilings & floorslasts 8–10 yrs≈2 lifetimes
  • Caulking (interior and exterior)Exterior wallslasts 5–10 yrs≈2 lifetimes
  • Exterior paintExterior wallslasts 7–10 yrs≈2 lifetimes
  • Smoke alarmWhole houselasts ~10 yrs≈2 lifetimes
  • Garbage disposalKitchenlasts ~12 yrs≈1 lifetimes
  • Clothes dryerWhole houselasts ~13 yrs≈1 lifetimes
  • RefrigeratorKitchenlasts 9–13 yrs≈1 lifetimes
Further out17
  • Asphalt shingle roof (architectural)Rooflasts ~30 yrsin 9 yrs
  • GFCI outletsKitchenlasts ~30 yrsin 9 yrs
  • Wood windowsWindowslasts ~30 yrsin 9 yrs
  • Boiler (hot-water or steam)Heating & coolinglasts ~40 yrsin 19 yrs
  • Chimney flue tileChimneylasts 40–120 yrsin 19 yrs
  • Concrete walkwayDeck & yardlasts 40–50 yrsin 19 yrs
  • Metal roofRooflasts 40–80 yrsin 19 yrs
  • Cast-iron drain pipe (below ground)Drains & sewerlasts 50–60 yrsin 29 yrs
  • Copper water supply linesWater pipeslasts 50–70 yrsin 29 yrs
  • Electrical service panelElectrical panellasts ~60 yrsin 39 yrs
  • Heating and cooling ductworkHeating & coolinglasts 60–100 yrsin 39 yrs
  • Vinyl sidingExterior wallslasts ~60 yrsin 39 yrs
  • Clay or concrete tile roofRooflasts ~100 yrsin 79 yrs
  • Fiber cement sidingExterior wallslasts ~100 yrsin 79 yrs
  • Fiberglass exterior doorWhole houselasts ~100 yrsin 79 yrs
  • Hardwood floorWalls, ceilings & floorslasts ~100 yrsin 79 yrs
  • ToiletsBathroomlasts ~100 yrsin 79 yrs

Typical lives from InterNACHI Standard Estimated Life Expectancy Chart for Homes, CPSC, U.S. Department of Energy (hosted guide), US Department of Energy, Energy Saver Guide (2022), InterNACHI, Smoke Alarm Inspection, US EPA, New Homebuyer's Guide to Septic Systems, InterNACHI and U.S. Consumer Product Safety Commission. Real lives vary with climate, quality and upkeep.

Your place

Add a ZIP code for a few sourced facts about where the house stands: the homes around it, radon, climate and flood maps. All optional.

Looking up a ZIP code needs JavaScript. Everything else on this page works without it.

Part two

The year in context

What was changing around 2005, how much the country was building, how houses of this era stand today and what homes were like then. All of it describes houses in general, never this one.

The year in context · events

Around 2005: what was changing in homebuilding

What happened in 2005 first, then the nearest dated events within 3 years either side, then longer changes 2005 falls inside. Each comes with its source and how strong that source is.

7 events on a 2001–2009 axis; the tagged line is 2005. Filled rings are dated to 2005. Dashed rings are approximate (circa). Dashed lines below began earlier and run through the whole window.

In 2005

  1. 2005

    Electrical

    GFCI protection extended to laundry and utility sinks

    GFCI protection for receptacles near laundry and utility sinks has been required since 2005.

    U.S. Consumer Product Safety CommissionPrimary source
    Quote
    “o Laundry and utility sinks (since 2005)” U.S. Consumer Product Safety Commission
  2. 2005

    Industry

    Homeownership and house building peak

    Home ownership peaked at nearly 69 percent in 2005, near the peak of the housing bubble, and Census counted 1,636 thousand new single-family houses completed that year.

    U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)Primary sourceWikipediaReference
    Quotes
    “2005 1,636 1,463 173 100 89 11” U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)
    “Home ownership peaked at nearly 69% in 2005, near the peak of the US housing bubble.” Wikipedia

Nearby, 2002 to 2008within 3 years of 2005

  1. 2002

    Electrical

    Arc-fault protection required in bedrooms

  2. 2003

    Materials

    Arsenic-treated lumber discontinued for residential use

  3. 2007

    Industry

    Median new house size reaches 2,277 square feet

    The median new single-family house completed in 2007 had 2,277 square feet, before dipping to 2,135 square feet in 2009 and rising to a peak of 2,467 in 2015.

    U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)Primary source
    Quotes
    “2007 2,277” U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)
    “2015 2,467 2,492 2,320 2,517 2,435 2,687 2,792 2,526 2,750 2,615” U.S. Census Bureau, Characteristics of New Housing 2017 (annual tables)
  4. 2008

    Policy

    EPA lead renovation, repair and painting rule

    EPA's 2008 RRP Rule, amended in 2010 and 2011, requires lead-safe work practices and certified renovators for paid work disturbing paint in homes built before 1978.

    U.S. Environmental Protection AgencyPrimary source
    Quote
    “EPA’s 2008 Lead-Based Paint Renovation, Repair and Painting (RRP) Rule (as amended in 2010 and 2011)” U.S. Environmental Protection Agency

Under way in 2005long-running

  1. 2001–2009

    Materials

    Imported Chinese drywall used in houses

Events come from a researched timeline of 150 dated changes to US homebuilding, each checked against the quoted source. Primary source is a government or standards body, Trade reference a trade body and Reference a general reference such as Wikipedia. A date is when something began or became required, not when every builder followed.

The year in context · building

Housing that year

How many new homes were started across the US in 2005, against every year since 1889. It is the whole country’s building, houses and apartments, not a count of houses like this one.

New homes started · 2005 · US

About 2.07 million new homes (houses and apartments) were started in 2005, the most since 1972, and 6% more than in 2004.

Started
2.07 million
Median new house price
$240,9002005 $
In one-family buildings
83%
  • Before 1959 the counts are historical estimates: Historical Statistics of the United States reconstructed them from building permits and other records, in series that change method in 1920, 1930 and 1945. They leave out farm housing. The figures here were transcribed by hand from a scanned copy and checked against the table’s own totals.
  • From 1959 the count is the Census Bureau’s privately owned housing units started; public housing is not in it. Mobile homes, conversions and temporary units are never counted.
  • The median new house price is in the dollars of 2005, not adjusted for inflation.

Source US Census Bureau, Historical Statistics of the United States, Colonial Times to 1970, Series N 156 (1889–1958); New Residential Construction, annual housing starts (1959–2025); New Residential Sales, median sales price of new houses sold.

As built · new houses of 2005

The typical new house of 2005

How new single-family houses completed in 2005 across the US were built, from the US Census Bureau’s Survey of Construction. These describe that year’s new houses, not this one, and a house may have been altered since.

Showing the whole US · choose your state above, or a region here

Region

New houses · 2005 · US

Most often: two stories or more, on a slab or other foundation, vinyl siding outside, gas heat and air-conditioning.

Median size
2,227sq ft
Completed
1,636,000houses

Median size, sq ft

  1. Floors

    55% 2 stories or more (incl. 1½)

    • 1 story44%
    • 2 or more55%
    • Split-level<0.5%
    • Floors are counted two ways: through 2008, 1 story, 2 or more, and split-level; from 2009, split-level and 1½-story houses count as 2 stories and 3 or more is separate. Only “1 story” is roughly comparable across the change.

    2 or more, over time

  2. Foundation

    53% Slab or other (piers, pilings)

    • Basement31%
    • Slab or other53%
    • Crawl space16%
    • The Census counts slabs together with other foundations such as piers and pilings, so this is “slab or other”, never slab alone.

    Slab or other, over time

  3. Outside walls

    34% Vinyl siding

    • Brick20%
    • Wood7%
    • Stucco22%
    • Vinyl siding34%
    • Fiber cement9%
    • Other7%
    • Aluminum siding is counted inside “other”, with block and stone.

    Vinyl siding, over time

  4. Heating fuel

    66% Gas (natural or bottled)

    • Gas66%
    • Electricity31%
    • Oil2%
    • Other or none1%
    • Gas includes bottled gas and propane as well as natural gas.

    Gas (natural or bottled), over time

  5. Heating system

    67% Forced-air furnace

    • Forced-air furnace67%
    • Heat pump29%
    • Hot water or steam3%
    • Other or none1%

    Forced-air furnace, over time

  6. Air-conditioning

    89% With air-conditioning

    • With air-conditioning89%
    • Without11%

    With air-conditioning, over time

  7. Bedrooms

    49% 3 bedrooms

    • 2 or fewer12%
    • 349%
    • 4 or more39%

    3 bedrooms, over time

  8. Bathrooms

    36% 2 bathrooms

    • 1½ or fewer4%
    • 236%
    • 2½33%
    • 3 or more26%

    2 bathrooms, over time

  9. Garage

    64% 2-car garage

    • 1-car garage7%
    • 2-car garage64%
    • 3+ car garage20%
    • Carport1%
    • None8%

    2-car garage, over time

  10. Fireplaces

    50% 1 fireplace

    • None45%
    • 150%
    • 2 or more5%

    1 fireplace, over time

  • These are new single-family houses completed that year in that region, including houses built for rent. They describe how houses were being built, not any one house.
  • These are survey estimates. Sampling error is larger for older years, for single regions and for small categories; “withheld” marks cells the Census did not publish.
  • Roofing is not recorded by this survey. Houses were not counted by state, so a region is the closest view.

Source US Census Bureau, Survey of Construction (Characteristics of New Housing), houses completed. Tables: Stories (2008 report), Foundation, Exterior Wall Material, Heating Fuel, Heating System, Air-Conditioning, Bedrooms, Bathrooms, Parking Facility, Fireplaces, Square feet.

As they stand today · houses built in the 2000s

Houses of the 2000s, today

The typical new house above is how houses were built in 2005. This is the other view: houses built in the 2000s that are still standing and lived in, as they are now, after decades of new roofs, new siding and renovation. Not as they were built.

Showing the whole US · detached single-family houses

Region

Roofs today · built in the 2000s · US

About 3 in 4 surviving houses from the 2000s across the US have asphalt shingle roofs today, and about 1 in 10 has clay tile.

Roof material as reported in 2020. Most roofs have been replaced at least once since these houses were built, so this is what is on them now.

Homes sampled
1,810
Average size
2,690sq ft
  • Asphalt shingles76%
  • Metal5%
  • Wood shakes4%
  • Slate1%
  • Clay tile10%
  • Concrete tile4%
  • Other1%

1,810 homes sampled · EIA RECS 2020

Asphalt shingles, by era built

The shell

  1. Outside walls

    43% Siding: vinyl, aluminum, fiber cement or steel

    • Siding43%
    • Brick20%
    • Wood8%
    • Stucco21%
    • Stone2%
    • Concrete block5%
    • Other1%

    1,810 homes sampled · EIA RECS 2020

    Siding, by era built

  2. Window glass

    82% Double-pane

    • Single-pane16%
    • Double-pane82%
    • Triple-pane2%

    1,810 homes sampled · EIA RECS 2020

    Double-pane, by era built

  3. Foundation

    51% Slab

    • Full basement27%
    • Part basement5%
    • Crawl space16%
    • Slab51%
    • Other1%

    4,268 homes sampled · AHS 2023

    Slab, by era built

  4. Stories

    50% 1 story

    • 1 story50%
    • 2 stories47%
    • 3 or more2%
    • Split-level1%

    1,810 homes sampled · EIA RECS 2020

    1 story, by era built

Heating and cooling

  1. Main heating fuel

    45% Electricity

    • Gas43%
    • Electricity45%
    • Oil2%
    • Propane7%
    • Wood2%
    • Other1%

    4,268 homes sampled · AHS 2023

    Electricity, by era built

  2. Main heating equipment

    76% Forced warm-air furnace

    • Furnace76%
    • Boiler3%
    • Heat pump16%
    • Electric baseboard1%
    • Wall or room heater2%
    • Stove or fireplace1%
    • Other or none1%

    4,268 homes sampled · AHS 2023

    Forced warm-air furnace, by era built

  3. Air-conditioning

    91% Central air

    • Central air91%
    • Room units only5%
    • None4%

    4,268 homes sampled · AHS 2023

    Central air, by era built

The rooms

  1. Bathrooms

    35% Two full bathrooms

    • No full bath<0.5%
    • 14%
    • 1½3%
    • 235%
    • 2½25%
    • 3+33%

    4,268 homes sampled · AHS 2023

    Two full bathrooms, by era built

  2. Fireplace

    55% Usable fireplace

    • Usable fireplace55%
    • None45%

    4,268 homes sampled · AHS 2023

    Usable fireplace, by era built

  3. Size

    40% 2,500 sq ft or more

    • Under 1,0003%
    • 1,000–1,49913%
    • 1,500–1,99923%
    • 2,000–2,49922%
    • 2,500+40%

    4,110 homes sampled · AHS 2023

    2,500 sq ft or more, by era built

  4. Garage or carport

    92% Garage or carport

    • Garage or carport92%
    • Neither9%

    4,252 homes sampled · AHS 2023

    Garage or carport, by era built

  • Surviving detached single-family houses as they are today, by the decade their occupants say they were built. Roofs, siding, windows and heating include every replacement since. Houses that were torn down are not in it, so this is not how the era built.
  • In the Census Bureau’s words, “some of the home characteristics … may have been more recent additions or installations and did not come with the home when it was originally built.”
  • Survey estimates from samples of homes: a band with fewer than 30 sampled homes is never shown, and one with fewer than 100 is marked small sample. The EIA survey covers occupied primary homes only; the American Housing Survey also counts vacant ones.

Source US Energy Information Administration, Residential Energy Consumption Survey 2020, public microdata (roof, walls, window glass, stories, size); US Census Bureau and HUD, American Housing Survey 2023, national public use file (everything else); shares computed from the public microdata with the surveys’ weights. Caveat quoted from Census working paper 2011-18.

The year in context · the country

The country in 2000

From the 2000 census, the one nearest 2005. These describe every home standing at the time, old and new, not houses built that year.

Housing facts from the 2000 census, the US
FactUS
Main house heating fuelsoccupied homesCensus, house heating fuelutility gas 51.2%electricity 30.3%oil or kerosene 9.0%bottled gas 6.5%
Homes owned by the people living in themCensus, homeownership66.2%
Homes built in the 2000s still standing todayACS 2020-2024, B2503419.6 million 13.6% of homes
Half of all homes standing today were built beforethe median year builtACS 2020-2024, B250351980

Census figures are shares of homes counted in 2000. Today’s count is the US Census Bureau’s American Community Survey, 2020 to 2024, which includes vacant homes and dates them by what residents report. Choose your state above to see it beside the US.

See something in the 2005 report that looks wrong?Report an error on this page