Year Built

Often present · Electrical

Challenger breaker panels

Challenger panels, the successor to the Zinsco line, were sold from 1978 to 1994, and one batch of their GFCI breakers was recalled in 1988.

Houses built
1978–1994
Dates from
Approximate era: Dates are an approximate era drawn from trade and reference sources.
How common
No reliable count exists
Priority
Good to know
Mainly about
Safety
Where to look
Electrical panel

What it is

The Zinsco product line was relabeled Challenger in 1978, and the business passed to Eaton in 1994. In 1988 CPSC announced a recall of about 9,000 Challenger GFCI breakers, types HAGF-15 and HAGF-20, made between February 22 and April 29, 1988, because a part can come loose and stop the ground-fault protection from working; no shock incidents were reported. Broader overheating claims about Challenger panels rest on inspector reports, not an agency finding.

How sure the dates are

Approximate era: Dates are an approximate era drawn from trade and reference sources.

Dates are an approximate era drawn from trade and reference sources. What the labels mean

How common it is

No reliable count exists

The 1988 recall covered about 9,000 breakers.

The years

Houses built from 1978 to 1994 may have it. It is most likely in houses built 1984 to 1992.

Earliest
About 1978An approximate date. It came in gradually, and sources differ by a few years.
Most likely
1984–1992The years it is most common: the solid part of the band.
Latest
About 1994An approximate date. The change came gradually, so a few later houses may have it.
  • Solid: most likely years
  • Faded edge: approximate date
  • Sharp edge: legal or recall date
  • Hatched: protection missing
  • Check first

How to check

  1. Look for 'Challenger' embossed on the panel door handle or printed on the label inside the door.

  2. Look for 15- or 20-amp breakers with a test button marked HAGF-15 or HAGF-20; those are the recalled types.

Where to look
  • Electrical panel

What to do

If you find itHave an electrician check the panel for heat damage and for HAGF breakers. If either turns up, or your insurer asks, replacing the panel is the usual route.

Sources

6 verified sources, 4 primary. Each quote is copied word for word from the page linked.

  1. US CPSC recall 88-095 (Nov 1988)Primary source

    These type HAGF-15 and type HAGF-20 circuit breakers were manufactured between February 22, 1988 and April 29, 1988

    cpsc.gov/Recalls/1988/challenger-electrical-equipment… (opens in a new tab)
  2. U.S. Consumer Product Safety CommissionPrimary source

    a mechanical part may become detached and prevent the ground fault feature of the circuit breaker from functioning

    cpsc.gov/Recalls/1988/challenger-electrical-equipment… (opens in a new tab)
  3. U.S. Consumer Product Safety CommissionPrimary source

    No electric shock incidents have been reported by Challenger.

    cpsc.gov/Recalls/1988/challenger-electrical-equipment… (opens in a new tab)
  4. U.S. Consumer Product Safety CommissionPrimary source

    Approximately 9,000

    cpsc.gov/Recalls/1988/challenger-electrical-equipment… (opens in a new tab)
  5. InterNACHITrade reference

    There are no recalls on these panelboards, with the exception of approximately 1,000 Eaton/Cutler-Hammer panels in 2014 that were built on the Challenger design.

    nachi.org/inspect-main-electric-panelboard.htm (opens in a new tab)
  6. WikipediaReference

    In 1978, the line changed names again, and was re-labeled Challenger.

    en.wikipedia.org/wiki/Zinsco (opens in a new tab)

A source misread, out of date or missing?Report an error on this page

Applies to houses built

Open the full report for a year to see everything else houses of that age have in common.

A guide to what to look for. Not an inspection.