Year Built

Check firstOften present · Electrical

Federal Pacific Stab-Lok panels

Federal Pacific Stab-Lok breaker panels were made from 1950 to 1980, and CPSC's own testing found breakers that failed calibration tests.

Houses built
1950–1990
Dates from
Approximate era: Dates are an approximate era drawn from trade and reference sources.
How common
No reliable count exists
Priority
Check first
Mainly about
Safety
Where to look
Electrical panel

What it is

Federal Pacific Electric made Stab-Lok breakers from 1950 to 1980, and they turn up mostly in houses built before 1990. CPSC opened an investigation in June 1980, confirmed that the breakers fail certain UL calibration tests, then closed the matter in 1983 without a recall and without deciding whether they are safe.

How sure the dates are

Approximate era: Dates are an approximate era drawn from trade and reference sources.

Dates are an approximate era drawn from trade and reference sources. What the labels mean

How common it is

No reliable count exists

Claims of 'millions of homes' come from advocacy sources, and no market-share data was found.

The years

Houses built from 1950 to 1990 may have it. It is most likely in houses built 1955 to 1980.

Earliest
About 1950An approximate date. It came in gradually, and sources differ by a few years.
Most likely
1955–1980The years it is most common: the solid part of the band.
Latest
About 1990An approximate date. The change came gradually, so a few later houses may have it.
  • Solid: most likely years
  • Faded edge: approximate date
  • Sharp edge: legal or recall date
  • Hatched: protection missing
  • Check first

How to check

  1. Open the panel door (not the inner cover) and read the label for 'Federal Pacific Electric', 'FPE' or 'Federal Pioneer'.

  2. Look for 'Stab-Lok' printed on or near the breakers.

  3. Breaker handles often have a red or orange stripe across the tip.

Where to look
  • Electrical panel

What to do

If you find itHave a licensed electrician inspect it. Replacing the whole panel is the usual fix. There was never a recall, so there is no manufacturer remedy.

Sources

6 verified sources, 5 primary. Each quote is copied word for word from the page linked.

  1. US CPSC (issued 3 Mar 1983; revised 18 Feb 2011)Primary source

    the Commission closed the matter without making a determination as to the safety of FPE circuit breakers or the accuracy of the manufacturer’s position on the matter

    cpsc.gov/Newsroom/News-Releases/1983/Commission-Close… (opens in a new tab)
  2. U.S. Consumer Product Safety CommissionPrimary source

    The Commission investigation into Federal Pacific Electric (FPE) circuit breakers began in June 1980

    cpsc.gov/Newsroom/News-Releases/1983/Commission-Close… (opens in a new tab)
  3. U.S. Consumer Product Safety CommissionPrimary source

    Commission testing confirmed that these breakers fail certain UL calibration test requirements.

    cpsc.gov/Newsroom/News-Releases/1983/Commission-Close… (opens in a new tab)
  4. U.S. Consumer Product Safety CommissionPrimary source

    the data currently available to the Commission does not establish that the circuit breakers pose a serious risk of injury to consumers

    cpsc.gov/Newsroom/News-Releases/1983/Commission-Close… (opens in a new tab)
  5. U.S. Consumer Product Safety CommissionPrimary source

    The Commission staff believes that it currently has insufficient data to accept or refute Reliance’s position.

    cpsc.gov/Newsroom/News-Releases/1983/Commission-Close… (opens in a new tab)
  6. WikipediaReference

    Stab-Lok is a brand name of electrical circuit breakers that were manufactured primarily by Federal Pacific Electric from 1950 to 1980.

    en.wikipedia.org/wiki/Stab-Lok (opens in a new tab)

A source misread, out of date or missing?Report an error on this page

Applies to houses built

Open the full report for a year to see everything else houses of that age have in common.

A guide to what to look for. Not an inspection.