Year Built

Often present · Hazardous materials

PCBs in old fluorescent light ballasts

Fluorescent light ballasts made before July 2, 1979 may contain PCBs, and EPA required PCB-free ballasts made from July 1978 to July 1998 to be marked 'No PCBs'.

Houses built
1950–1979
Dates from
Federal rule: Dates come from a federal rule or a model building code.
How common
No reliable count exists
Priority
Good to know
Mainly about
Safety
Where to look
Garage · Basement & foundation · Kitchen

What it is

EPA says PCB-containing building materials may have been widely used in buildings built or renovated between about 1950 and 1979, and that fluorescent light ballasts made before July 2, 1979 may contain PCBs. In a house the realistic case is an original fluorescent fixture in a garage, basement, kitchen or workshop. PCB caulk is documented mainly in schools and larger buildings.

How sure the dates are

Federal rule: Dates come from a federal rule or a model building code.

Dates come from a federal rule or a model building code. What the labels mean

How common it is

No reliable count exists

No reliable count exists for houses; EPA's material is about schools and other larger buildings.

The years

Houses built from 1950 to 1979 may have it.

Earliest
About 1950An approximate date. It came in gradually, and sources differ by a few years.
Most likely
Not narrowedSources give no narrower window, so treat every year in the range alike.
Latest
1979A fixed date, such as a ban, a recall or a code change.
  • Solid: most likely years
  • Faded edge: approximate date
  • Sharp edge: legal or recall date
  • Hatched: protection missing
  • Check first

How to check

  1. Turn the power off, open the fluorescent fixture cover and read the ballast label.

  2. A 'No PCBs' label means the ballast is PCB-free. EPA required that label on PCB-free ballasts made from July 1978 to July 1998, so a later ballast may have no label at all.

  3. An unlabeled magnetic ballast, or oily or tarry leakage, suggests a PCB ballast. Only magnetic T12 ballasts may contain PCBs.

Where to look
  • Garage
  • Basement & foundation
  • Kitchen

What to do

If you find itReplace the old fixture or ballast, and take a PCB ballast to a hazardous-waste collection rather than the trash. Before renovating a 1950 to 1979 masonry apartment building, have suspect caulk tested.

Sources

4 verified sources, 4 primary. Each quote is copied word for word from the page linked.

  1. US EPA, PCBs in Building MaterialsPrimary source

    potential widespread use of PCB-containing building materials in schools and other buildings constructed or renovated between about 1950 and 1979

    epa.gov/pcbs/polychlorinated-biphenyls-pcbs-building-… (opens in a new tab)
  2. US EPA, PCB-Containing Fluorescent Light Ballasts in School BuildingsPrimary source

    EPA regulations also require that all FLBs built between July 1, 1979, and July 1, 1998, that do not contain PCBs must be labeled "No PCBs."

    epa.gov/pcbs/polychlorinated-biphenyl-pcb-containing-… (opens in a new tab)
  3. U.S. Environmental Protection AgencyPrimary source

    Any FLBs manufactured before July 2, 1979, may contain PCBs.

    epa.gov/sites/default/files/2020-07/documents/pcb-flb… (opens in a new tab)
  4. U.S. Environmental Protection AgencyPrimary source

    between July 1, 1978 and July 1, 1998, to mark the ballasts that do not contain PCBs with the statement "No PCBs".

    epa.gov/sites/default/files/2020-07/documents/pcb-flb… (opens in a new tab)

A source misread, out of date or missing?Report an error on this page

Applies to houses built

Open the full report for a year to see everything else houses of that age have in common.

A guide to what to look for. Not an inspection.